Drive fast format failed
A failure occurred while performing a fast format on a new drive.
Important
You can remove the drive while the storage array is receiving I/O.
CAUTION
Electrostatic discharge can damage sensitive components
Always use proper anti-static protection when handling components. Touching components without using a grounding wrist strap may damage the equipment.
Recovery Steps
Is this the first time this problem is being reported?
If yes, go to step 2.
If no, contact your Technical Support Engineer.
Remove the drive shown in the Details area.
Wait at least 30 seconds, and then re-insert the drive. Its fault indicator light may be lit for a short time (one minute or less).
Select Recheck to ensure the problem has been resolved.
Give documentation feedback