Skip to main content

Configuring SNMPv1 Agent

The following procedure describes how to configure SNMPv1 Agent on the Flex System chassis.

Procedure

  1. Click Mgt Module Management > Network > SNMP, and select the Enable SNMPv1 Agent check box.
  2. Click Traps, and select the Enable SNMP Traps check box.
  3. Select Communities, and input the following information:
    1. In the Community name field, input the name that assigned to the Flex System chassis.
    2. From the Access type list, select Set.
    3. From the Fully Qualified Hostnames or IP Addresses list, select appropriate address.
      Note

      • By default, the Chassis Module Security Policies level is Secure. At this level, SNMPv1 Agent cannot be enabled. To enable SNMPv1 Agent, click Mgt Module Management > Security > Security Policies > Legacy > Apply.

      • Ensure that the values of SNMPv1 Agent account in the SCOM discovery wizard are consistent with those set in Operations Manager. Otherwise, Operations Manager cannot discover the Flex System chassis.