Skip to main content

System firewall settings

This section describes how to set firewall exceptions.

The following table list the ports used by Hardware Management Pack for SCOM.
Table 1. Ports used by Lenovo XClarity Integrator Hardware Management Pack for Microsoft System Center Operations Manager
SourceTargetProtocolNotes
PortLocationComponentPortLocationComponent
Not specifiedLXCILXCI ServiceTCP 5724Management serverSDK serviceN/AConnect to Operations Manager SDK service.
Not specifiedManagement server BMC nodeLenovo Hardware MP BMC nodeTCP 9500*LXCILXCI ServiceHTTPSYou can change the port when installing LXCI.
Not specifiedManaged hostLenovo Hardware MPTCP 9500*LXCILXCI ServiceHTTPSIt is required for BMC auto discovery.
Not specifiedLXCILXCI Service (localhost/127.0.0.1)TCP 5432*LXCIPostgreSQLN/AThe port can be changed when the PostgreSQL database is installed.
Not specifiedLXCILXCI ServiceTCP 5988BMC nodeBMC nodeHTTP, CIM

It is not required when Redfish protocol is used.

The BMC HTTP/HTTPS ports are changeable in BMC portal.

Not specifiedLXCILXCI ServiceTCP 5989BMC nodeBMC nodeHTTPS, CIM
Not specifiedLXCILXCI ServiceUDP 427BMC nodeBMC nodeSLPSLP is used to discover BMC.
Not specifiedManagement serverLenovo Hardware MPTCP 161ChassisCMM/AMMSNMPYou can change the ports in CMM portal.
Not specifiedManagement serverLenovo Hardware MPTCP 162ChassisCMM/AMMSNMP Traps
Note
The ports marked with an asterisk (*) are registered by LXCI. The others are only used to access specific services in LXCI.