timeouts command

Use this command to display or change the timeout values.

To display the timeouts, type timeouts.
To change timeout values, type the options followed by the values.
To change timeout values, you must have at least Adapter Configuration authority.

The following table shows the arguments for the timeout values. These values match the graduated scale pull-down options for server timeouts on the web interface.

Table 1. timeouts command.
The following table is a multi-row four column table consisting of the options, option descriptions, and associated values for the options.
Option	Timeout	Units	Values
-f	Power off delay	minutes	disabled, 0.5, 1, 2, 3, 4, 5, 7.5, 10, 15, 20, 30, 60, 120
-l	Loader timeout	minutes	disabled, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 7.5, 10, 15, 20, 30, 60, 120
-o	Operating system timeout	minutes	disabled, 2.5, 3, 3.5, 4
-s	OS failure screen capture with HW error	/	disabled, enabled

Syntax:

timeouts [<em className="ph i">options</em>]
options:
-f <em className="ph i">power_off_delay_watchdog_option</em>
-o <em className="ph i">OS_watchdog_option</em>
-l <em className="ph i">loader_watchdog_option</em>
-s <em className="ph i">OS failure screen capture with HW error</em>

Example:

system> timeouts
-o disabled
-l 3.5
-f disabled
-s disabled
system> timeouts -o 2.5
ok
system> timeouts
-o 2.5
-l 3.5
-f disabled
-s disabled

Give documentation feedback