Configuring the power restore policy

To configure how the server reacts when the power is restored after a power loss, use the information in this topic.

When configuring the power restore policy, the following three options are available:

Always Off: The server will remain powered off even when power is restored.

Restore: The server will automatically be powered on when power is restored if the server was powered on at the time that the power failure occurred. Otherwise, the server power will remain off when power is restored.

Always On: The server will automatically power on when power is restored.

Click Apply after making the configuration changes.

Note

The Power Restore Policies option is not available in a chassis containing blade or high-density server nodes. The power restore policy is controlled by the chassis management controller instead of the XClarity Controller.

Give documentation feedback