Update

The topics in this section describe the following:
This table lists the update application commands.
Table 1. Update application commands
Command Description
acquire

Download firmware and device driver updates for the BMC-based system and firmware updates of CMM, SMM, and I/O switch module.

For more information, refer to acquire command.

canceltask

Cancel the update task staged in XCC2 on the ThinkSystem V3 systems.

For more information, refer to canceltask command.

checktask

Check the status of update task staged in XCC2 on the ThinkSystem V3 systems.

For more information, refer to checktask command.

compare

Compare versions of installed firmware and device driver with candidate updates, and generates a list of recommended updates.

For more information, refer to compare command.

flash

Apply updates of firmware and device drivers requiring upgrade, based on the result of the compare command.

For more information, refer to flash command.

iflash

Parse and update the system firmware.

For more information, refer to iflash command.

multicompare

Remotely compare the firmware information of multiple BMC, and specify the BMC information and the configuration parameters.

For more information, refer to multicompare command.

multiflash

Remotely upgrade multiple BMC, and specify the BMC information and configuration parameters.

For more information, refer to multiflash command.

multiscan

Remotely scan the firmware information of multiple BMC, and specify the BMC information and the configuration parameters.

For more information, refer to multiscan command.

scan

Get installed firmware and device driver inventory information of a BMC-based system or installed CMM firmware and I/O switch module firmware or installed SMM firmware.

For more information, refer to scan command.

startstaged

Start the update task staged in XCC2 on the ThinkSystem V3 systems.

For more information, refer to startstaged command.