FQXST0590M : A disk group has been quarantined.

A disk group has been quarantined.

Severity

Major

Serviceable

Yes

Automatically Notify Support

No

User Response

  1. To restore the disk group, use the CLI dequarantine command to remove the disk group from quarantine. If more than one disk group is quarantined, you must individually remove each disk group from quarantine, whether it is fault tolerant or not. When the disk group is removed from quarantine, the disk group will return to the state it was in before being quarantined. For example, if the disk group was reconstructing before being quarantined, the disk group will resume reconstructing where it stopped.
  2. For a linear disk group, if you want to find where parity is incorrect, use the CLI scrub vdisk command with the fix parameter disabled. This step is optional and not required to fix data integrity issues. For a fault tolerant disk group, run either scrub disk-groups for a virtual disk group or scrub vdisk with the fix parameter enabled for a linear disk group. This step will make the parity consistent with the existing user data, and is required to fix data integrity issues.
  3. For a reconstructing disk group, let reconstruction finish, then run either scrub disk-groups for a virtual disk group or scrub vdisk with the fix parameter enabled for a linear disk group. This step will make the parity consistent with the existing user data, and is required to fix data integrity issues.
  4. Restore the data to the disk group from a backup copy.