If a chassis is being managed by Lenovo XClarity Administrator, and XClarity Administrator fails, you can restore the management functions and the local user accounts for a CMM until the management node is restored or replaced.
Procedure
Complete one of the following procedures to restore management on a CMM.
If this is the first time that you have used the RECOVERY_ID account to log in to the CMM, you must change the password.
read -f unmanage -T mm[p]
For more information, see the read command in the CMM online documentation.
fsmcm -off
The fsmcm command disables XClarity Administrator user-account management and allows you to use local CMM user accounts to authenticate to the CMM and any management processor that is installed in the chassis.
After you run the fsmcm -off command, the RECOVERY_ID account is removed from the CMM user registry. When you run the fsmcm -off command, the CMM CLI session terminates. You can now authenticate to the CMM and other chassis components by using local CMM credentials, and use local CMM credentials to access the CMM web interface or CLI for the chassis until user management by XClarity Administrator is restored.
For more information, see the fsmcm command in the CMM online documentation.
After XClarity Administrator is restored or replaced, you can manage the chassis again (see Managing chassis). All information about the chassis (such as network settings) is retained.