Skip to main content

Encapsulation is not disabled after a server is unmanaged

If global encapsulation is enabled, the encapsulation mode changes to encapsulation lite when you manage a server. Typically, when you unmanage the server, the encapsulation mode is set back to normal (disabled).

If the encapsulation mode does not change to normal, complete the following step to disable encapsulation:
  1. Reboot the baseboard management controller.
  2. Connect to the target server from a system that is configured to use the IP address of the failed Lenovo XClarity Administrator virtual appliance. Then, disable encapsulation by opening an SSH session to the device and running the following command:
    encaps lite off