Service Enablement and Port Assignment

Click Network under BMC Configuration to view or modify XClarity Controller port assignments. Complete the following fields to view or modify port assignments:

Web

The port number is 80. This field is not user-configurable.

Web over HTTPS

In this field specify the port number for Web Over HTTPS. The default value is 443.

REST over HTTPS

The port number will automatically change to the one specified in the Web over HTTPS field. This field is not user-configurable.

CIM over HTTP

In this field specify the port number for CIM over HTTP. The default value is 5989.

Note

CIM is disabled by default.

Remote Presence

In this field specify the port number for Remote Presence. The default value is 3900.

IPMI over LAN

The port number is 623. This field is not user-configurable.

Note

IPMI is disabled by default.

SFTP

In this field specify the port number that is used for the SSH File Transfer Protocol (SFTP). The port number is 115. This field is not user-configurable.

Note

IMM.SFTPPortControl=open is required for OneCLI in-band updates.

SLP

In this field specify the port number that is used for the SLP. The port number is 427. This field is not user-configurable.

Note

There are two service types that XClarity Controller reports:

• service: management-hardware.Lenovo:lenovo-xclarity-controller

• service: wbem

SSDP

The port number is 1900. This field is not user-configurable.

SSH

In this field specify the port number that is configured to access the command line interface through the SSH protocol. The default value is 22.

SNMP Agent

In this field specify the port number for the SNMP agent that runs on the XClarity Controller. The default value is 161. Valid port number values are from 1 to 65535.

SNMP Traps

In this field specify the port number that is used for SNMP traps. The default value is 162. Valid port number values are from 1 to 65535.